Now we import the projection area into Fly-Elise. Together with the 3D-model of our simulator we have the perfect workspace.

(Note: You can find our 3D-model in our Support Area in case you like to use it for your own calculation.)

We tried several types of projectors. Main issue even with short throw projectors was the necessary height for a proper positioning. We basically have enough space for a high positioning but due to the wall angles the picture will be quite flurry. So we needed to find projectors with an utltimate short throw.

We finally found a Vivitek DH758UST which looks good from a technical view. This projector is a bit more expensive than others but it has the advantage to be place right above the cockpit.

So we will order them and try it. While waiting we have enough to do with preparing the room...











As you have seen in earlier posts the projection area of our simulator in Bottrop will be a bit tricky to work with. Especially the angle of the roof will be a real challenge. But let's see how far we get.

We will try to confirm the possibility to use the walls as projection area with the help of Fly-Elise. To do so we firstly design a simple model of our projection area with 3D builder a program that's delivered with Windows 10 and easy to use.








So far so good. This will be our projection area.





The team is working on orders while we are looking for more space.... ;-)

IMG 7004

IMG 6995

IMG 6998

IMG 7003

IMG 6994

IMG 6997


Flight Simulation is about passion and dedication. And even our van for European deliveries shows this dedication.... ;-)

14956447 708973372599980 4861150000386603690 n

After a great show the simulator is pushed back into our van and off we go.... ;-)

IMG 6883

IMG 6885

IMG 6888

Ricarda, Kevin, Ben and Christian

Thanks to all customers who have visited us at this years FSweekend in Lelystad. It was again a real pleasure to see many of you again and to see new customers who are into flying an A320.

This time we showed a complete cockpit. The team managed to set the simulator up on a Friday night within 3 hours after a drive of more than 700 kilometers!

IMG 6850

Setup almost done... ;-)


IMG 6857

IMG 6858

IMG 6878

Christian doing business... ;-)


At the FSweekend 2016 in Lelystad we had the pleasure to welcome Tom David from Flight Sim Academy at the flight deck. Tom spontaneously set up our simulator and impressed the audience with his expertise.

Please note: Tom is not a real 320 pilot or a student pilot. His experience is based on flying A320 in the desktop and on reading the FCOM. Great job, Tom - even though some knobs did not respond as they should, due to previous customer "testing". ;-)

It was a pleasure having you with us.




Some of you plan their flight simulator location in an own 3D environment. To make your planning work easier we provide a basic 3D model of our A320 simulator. Of course this model does not have too much details but it should allow you to estimate required space at your event location or your home.

Furthermore you can use this 3D model to plan your projection. Our partner Fly-Elise has a great software for this and you can import our model directly into their software to calculate position of your projectors and minimize shadow throw.


To download the model please register to our support portal.



You may ask you why we partly show very little details of our products on our website. Well, you can see below a reason for this.

There are people outside that not only take our product ideas and pictures but also copy our text and claims word by word.

We really feel flattered. Only cool brands are copied by others. ;-)







WP 20160603 16 57 47 Rich WP 20160603 15 51 40 Rich

We started in 2015 with the clear goal of building an A320 cockpit simulator for commercial use in Leipzig, Germany. At first we had to find a supplier for electrical parts and all required structural components. Ideally for a complete solution. Furthermore we needed a reliably partner who supports us and ensures that we can run our business continuously.

After some research we made contact with VIER IM POTT and after some kind email communication it became clear – we found the right partner for our project. On the pictures of their website everything looked very convincing and original but we wanted to see it in real before investing our money.

We took the chance to visit the production site in Dresden and we were quite impressed about quality of the cockpit components and the knowledge paired with enthusiasm of the VIER IM POTT team. All questions had been answered.

Once decision has been made we very excitingly looking forward to the delivery. Due to the distance to Dresden we picked up components ourselves and started building the simulator in Leipzig. As a very early customer we experienced some minor difficulties but the team was helping fast and solution oriented and we could clearly see that they wanted us to be successful.

Since October 2015 our simulator is on-duty now without any considerable problems. Our customers have a great flying experience and we receive 100 % positive feedback from our guests. Many thanks to VIER IM POTT! Our next simulator will be again from you guys – for sure…!


 WP 20160603 16 59 35 Rich WP 20160603 16 52 41 Rich WP 20160603 16 55 39 Rich WP 20160603 16 55 10 Rich

We received this feedback from Mario almost one year after installation. So we took the chance to visit his simulator in Leipzig. It was fantastic to see his business growing.

Mario has realized so many really great ideas to make a flying event a remarkable experience for his customers. We never saw a simulator build with so much love to details. Many thanks for this experience, Mario! It was a real pleasure working with you.



logo fd le 002a

Dieskaustr. 423
04249 Leipzig

As the dream of a round 220 degree projection area seems not to come true, we plan to use walls and ceiling as projection area. The expected result will not be round of course, but also have the 220 degree view.

First we need to contruct the front projection area. Challenge here: we will need to access the outside door for cleaning and sometimes get fresh air.

As we will not be able to make the projection area movable we trust in our personal degree of fitness and provide a 50 cm high passage below the projection area. ;-)


a sim berechnung 14


BTW. Dimensions seem to be ok - despite of the sloping walls of course. In general we have around 4.5 meters width and height. A real benefit will probably be the high ceiling as we can place the forward projector very high not disturbing the light of the side projectors. But this will be math in a few weeks.

a sim berechnung 12


The access door to the room does not seem to be place properly. But due to the sloping walls there es no other chance to place it - and it's already there...

 sim berechnung 11

We place the simulator in the architectural environment of the house and test dimensions to get a feeling of the available space.

 sim berechnung 06

 sim berechnung 07

sim berechnung 08




Some readers might remember that our plans to build a showroom in Bottrop needed to be postponed due to mining acitivties in the neighborhood. Coal mining in the "Ruhrgebiet"-area caused severe damages to our home and all plans had to be stopped.

But now we can start over again and detailled planning phase has begun. As always plans included some challenges and ours is - space. The simulator will be placed below the roof floor of our house. So we will have sloping walls. Plan is to establish a three projector set-up but in the first step we need to figure out if everything fits in general.

 sim berechnung 02
Picture shows planned projection area.


 sim berechnung 03







Have you ever wondered where the name "VIER IM POTT" comes from? Well, the name has a history and this is a little hint to solve the puzzle... :-)

WP 20160810 12 36 32 Rich

Melden Sie sich zu unserem Newsletter an.

Als Mitglied der VIER IM POTT-Community bleiben Sie immer auf dem neuesten Stand in Bezug auf neue Produkte, Veranstaltungen oder wichtige Blog-Artikel.

Jähne GmbH für Produktinnovation
Freiberger Straße 114, 01159 Dresden

Telefon: +49 351 4116349
Öffnungszeiten: Mo - Fr 08:00 - 17:00


für private und kommerzielle Kunden Bottrop, NRW, Deutschland

Bitte vereinbaren Sie einen Termin wenn Sie unsere Produkte testen möchten.


made in germany worldwide 3  Made in Germany

Unsere Qualitätsprodukte werden in Deutschland hergestellt und weltweit versendet!


Sie können 100 % sicher mit PayPal oder per Banküberweisung bezahlen.