Downloads

Read this document before your start with your assembly planning.

Prepare for the assembly with our checklist and your simulator installation will be easier.

Panels do not work like expected? Here is a guide how to troubleshoot efficiently.

Dimensions of our standard size closed shell.
 

Floor dimensions of our standard size closed shell 

Check the approx eye positions to estimate the field of view (FOV) of your projection area (optional)

Dimenions of our 5.0 m diamater projection are in conjunction with our standard size closed shell.

Dimenions of our 4.5 m diamater projection are in conjunction with our standard size closed shell.

Dimenions of our 4.0 m diamater projection are in conjunction with our standard size closed shell.

Floor dimensions of our size M closed shell

Dimenions of our 4.0 m diamater projection are in conjunction with our size M closed shell.

This shell frame is the base for our standard size closed shell. It can be fitted with shell components.

This shell frame is the base for our size M closed shell. It can be fitted with size M shell components.

This shell frame can cover front and aft overhead section. It can be fitted with the front window section.

This drawing gives you an overview how the cockpit fits into the shell frame pim.

This shell frame has the minimum size neccessary to hold the front overhead section.

This drawing gives you an overview how the cockpit fits into the shell frame mini.

The shell frame mini for single seater can hold the overhead and is less wide than the shell frame mini.

This stand can holds the front overhead without a shell frame. Please contact us before you buy.

This drawing shows the overhead stand in conjunction with a complete open trainer cockpit.

Drawing shows the dimensions of our MIP structure for your room planning.

This documents explains how our flood light system works and how to install it.

Drawing shows the outer dimensions of our overhead structure for your planning.

Drawing shows the dimensions of our pedestal box for your planning.

Drawing shows the panel sizes for the pedestal box.

Documentation how to wire the sidestick mechanic and tiller to the USB joystick card.

Documentation how to wire the sidestick mechanic  to the USB joystick card.

Documentation how to wire tiller to the USB joystick card.

With this document you can check if the tiller fits into your side base.

With this document you can check how the rudders fit into your MIP structure.

This document explains how to position the VIER IM POTT rudder system in the cockpit.

The document gives you an overview how to install the necessary software to your computers. Please note that software updates may have changed the interface. So all information given area intended as a general guide.