MSFS2024 Installation and Configuration
Overview
This document describes how to configure the installed software so that all components work together and the most important basic settings are available. Please note that depending on the configuration of the simulator, other performance settings may also be useful.
In Premium Plug & Fly versions, the software is already pre-configured. In this case, you do not need these instructions.
Preconditions
Before you start make sure that your computers have an up-to-date Windows 11 installed, you have alle necessary software installed and you did all wiring of displays and USB connections. You will also need a stable internet connection. Ideally you have all computers be placed at its final position in the room, so you do not need to unplug cables any later again.
MSFS2025 - Installation
Install the latest version via MS Store (recommended).
Flight Models and Modules
To connect ProSim with Prepar3D, various add-ons must be installed.
- ProSim MSFS2024 Module
- ProSimA322 Visual Model for MSFS2024 (may have a different name)
Please install the latest version by downloading the installation programs via ProSim System and following the respective instructions of the installation programme.
You can find important folder paths here: Important Storage Locations
MSFS2025 - Configuration
Below you will find our recommendation for the settings based on three projectors and an RTX5090 video card. Other settings may also work.
Please note that projection setup with warping and edge blending is covered by a separate document.
Please continue with calibration of the flight controls.
