Issue Definition It is a rare but annoying problem when MCDU or display windows move to a different location or are not displayed at all after the computers are switched on. To be fair, this is not a ProSim problem. It happens when Windows (10 and 11...

One of our customers has built a closed single-seater cockpit with a 180° outside view. To give flight simulator enthusiasts some hints for building such a cockpit, we include the description of his construction in our blog. On the other hand, we are interested in learning about a potential demand for prefabricated VIER IM POTT parts for a single seater. Please contact us if you have questions or suggestions.

Design Objectives

• The simulator fits in a small room.
• The simulator can be positioned in a corner of the room in order to save floor space. To provide adequate access for maintenance work, the simulator is relocatable off the walls.
• The simulator can be disassembled. Even the largest part can be fed through a standard size door (73.5 x 198.5 cm).
• 180 degree outside view with 4K TV monitors. TVs have been preferred over projectors/screens as they use less space, have more luminance and a better contrast ratio.

Construction

• Dimension of the simulator: 240 x 170 x 200 cm (width x depth x height).
• The simulator base consists of two 19 mm MDF boards (170 x 120 cm) bolted together. 24 rotating wheels are attached to the bottom of the boards:

To keep the simulator base free from intruding screws, the wheels and struts are glued to the boards. This ensures area-wide 19 mm depth for wood insert nuts.

• All decomposable parts of the simulator are tied together by M bolts and nuts:

Wood screws have only been used for the reinforcement of non-detachable bonds.

The cockpit rack (side stays and roof beams) is built for adequate load bearing and torsion resistance:
   
   

Some VIER IM POTT shell frame parts have been shortened to make the shell frame fit onto the simulator base plate. The overhead panel is suspended to a roof cross-beam in order to obviate positioning restrictions for the monitors.

Our cockpits are very modular and we have different options for the sidebase. Sidestick handle  Bellow Tiller The sidestick mechanism is available in two versions: Original-like high-quality mechanism with oil damping.This mechanism is...

Did you know? Projector bulbs loos up to 50 % of its brightness over the years. This is the reason why we deliver our professional computer packages with spare bulbs - to ensure investment security!

After almost five years of use we change the lamps in our showroom in Bottrop.

Hi all, 

Some customers have asked us for tricks on how to defeat the dust in a simulator without having to disassemble everything or damage the panels. So here's the way we do it.

First, we need to locate the vacuum cleaner in the house. With a furniture brush with very soft bristles (such as horsehair), the dust can be removed even from the smallest corners and the Sim looks like new again. In addition, this procedure does not take long and you can fly back quickly.

We often get the question, how to install a side stick on a joystick mechanic. Markus from Austria has kindly taken the trouble and documented the whole procedure for cockpit builders:

 Tools you need:

• Wood Saw
• Wirecutter
• telephone pliers
• Dremel (alternative: file)
• Soldering iron (15W) + solder
• Allen wrench

1. Remove of the original handle
Remove all the screws on the handle, (there are two screws below the rubber sleeve). On the bottom part of the handle there is a tap that holds the two parts of the handle together.

We are often asked for our recommendation for settings in P3D. Due to many factors, there is no universal answer. However, we are happy to share with you the parameters that work well for us in terms of balanced graphics performance and stable frame ...